Smart Camera User Manual
45
When adopting TCP/IP or Serial to transmit the data, you are required to set
parameters shown in the figure below.
Figure 3. 35
Data Format Settings
3.8
User Set Control
Click User Set Control from the Attribute list.
3.8.1 Parameters Saving and Loading
The camera can save four groups of parameters, including one group of factory
parameter and three groups of configurable parameter. You can save currently
configured parameter and set corresponded default parameter when logging in next
time in User Set Control in the attribute list.
Save Parameters: Click User Set Control from the Attribute list. Select one
parameter (except Default) from the dropdown list of the
User Set Selector
. Click
Execute of
User Set Save
to save the settings.
Load Parameters: Click
User Set Control
from the Attribute list. Select one
parameter (except Default) from the dropdown list of the
User Set Selector
. Click
Execute of
User Set Load
to load the settings.
Default Parameters: Click
User Set Control
from the Attribute list. Select one
parameter from the dropdown list of the
User Set Default
. Click Enter on the
