Chapter 2
Camera Installation and
Configuration
2.1 Installing the Camera
Steps:
1.
Unpack the camera package, rotate the water-proof lens case anticlockwise,
and take out the lamp cup.
2.
Install the lens to the camera body by rotating the lens clockwise.
3.
Install the IR lamp cup (first), and water-proof lens case back.
Press the Bayonet as shown
by the Arrow to Separate
the Lamp Cup
Disassemble the Lamp Cup
Figure 2. 1
Lens Installation
4.
Install the camera to the desired position by using M4 screws. There are three
installation types shown as the figures below, and choose the proper
installation type according to your needs.