HIKVISION iDS-TCE500-B/1550 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 73

HIKVISION iDS-TCE500-B/1550 Скачать руководство пользователя страница 22

3. Optional: Select the violation type(s) to be detected, and set the corresponding parameters.

Refer to Set Violation and Incident Detection for details.

4. Set continuous capture parameters. Refer to Set Continuous Capture Parameters for details.
5. Set Capture Type and Speed Detection Mode. Refer to Set Scene Mode for details.
6. Set the lane parameters. Refer to Set Linked Lane Parameters for details.
7. Set violation recording parameters. Refer to Set Violation Recording Parameters for details.
8. Set speed limit parameters. Refer to Set Lane Speed Limit Parameters for details.
9. Check Enable Positioning Frame, and set Positioning Frame Size.

The positioning frames of vehicle bodies and license plates will be overlaid on the captured

pictures.

10. Optional: Check the other lane(s) to copy the same settings.
11. Set traffic light detection. Refer to Set Traffic Light Detection Parameters for details.
12. Draw the lane lines and other lines.

1) Click Draw Lane Line.

Note

The system will capture a picture and use it as the background. You can also check Video

Background to use the live view as the background.

2) Set the property of the lane lines.

3) Select Stop Line, Borderline of Turning Left, Borderline of Turning Right, or Trigger Line of

Going Straight according to the actual scene.

4) Select the default lane lines and other lines, and drag the two end points of the line or drag

the whole line to adjust its position according to the actual scene.

5) Click OK.

Network Traffic Camera Configuration Manual

14

«
...
20
21
22
23
24
...
»

Содержание iDS-TCE500-B/1550










































































Отзывы:

Нет отзывов