HIKVISION iDS-TCE500-B/1550 Скачать руководство пользователя страница 32

Страница: 32 / 73

Violation Detection

Type

Description

●

Capture Position Control Ratio: When the length of the target

vehicle body beyond the stop line exceeds the ratio, the vehicle is

regarded as failing to yield for pedestrians, and capture will be

triggered.

●

Pedestrian Detection Area Type: Select the type according to the

actual scene.

●

Pedestrian and Vehicle Distance Judgment Mode:

○

Distance from Pedestrian to Vehicle Center: The violation of

failing to yield for pedestrians is judged according to the distance

from the horizontal coordinate of the pedestrian to the horizontal

coordinate of the vehicle target center.

○

Distance from Pedestrian to Lane Center: The violation of failing

to yield for pedestrians is judged according to the distance from

the horizontal coordinate of the pedestrian to the horizontal

coordinate of the lane line center.

Without Helmet

The driver of a non-motor vehicle does not wear the helmet. Check it

and select the number of captured picture(s).

1.5.2 Set Linked Lane Parameters

You can set the properties and parameters of the linked lanes.
Steps

Note

●

Not all the application modes support linked lane parameters settings.

●

The linked lane parameters vary with different models. The actual device prevails.

1. Go to Configuration → Capture → Application Mode .
2. Select Trigger Mode.
3. Set lane parameters.

Lane No.

The No. of the selected lane.

Linked Lane No.

The corresponding lane No. linked with the current lane. The lane No. will be overlaid on the

captured picture.

Lane Type

If you select Highway Emergency Lane or Truck Forbidden Lane, set the period.

Network Traffic Camera Configuration Manual

Содержание iDS-TCE500-B/1550










































































Результаты поиска

Содержание iDS-TCE500-B/1550

Отзывы:

HIKVISION iDS-TCE500-B/1550, Руководство по настройке, Страница: 32 / 73

Результаты поиска

Содержание iDS-TCE500-B/1550

Отзывы: