HIKVISION iDS-TCE500-B/1550 Скачать руководство пользователя страница 43

Страница: 43 / 73

Shutter

If the shutter speed is quick, the details of the moving objects can be displayed better. If the

shutter speed is slow, the outline of the moving objects will be fuzzy and trailing will appear.

Gain

It refers to the upper limit value of limiting image signal amplification. It is recommended to

set a high gain if the illumination is not enough, and set a low gain if the illumination is

enough.

Daytime Brightness Enhancement

It refers to the brightness of the image in the daytime. Higher value stands for brighter image.

Window Enhancement

In front light or back light scene, the flash light may not pass through the vehicle window, or

the image effect of the window is bad caused by the light. In this condition, you can check

Window Enhancement. The higher the Brightness Enhancement Level is, the brighter the

window image is. The higher the Defog Level is, the better the permeability of the window

image is.

White Balance Level

It is the white rendition function of the device used to adjust the color temperature according

to the environment.

Contrast Enhancement

Check Contrast Enhancement to capture clearer images. Select Contrast Enhancement

Mode, and set corresponding parameters.

Contrast Enhancement Mode

Description

The contrast enhancement mode is always enabled.

Time

The contrast enhancement mode is enabled during the set

start time and end time. In other time, it is disabled.

Brightness

The contrast enhancement mode is enabled according to the

brightness of the surroundings. In this case, you can set

Brightness Level.

Contrast Enhancement Level

The higher the level is, the more the contrast is enhanced.

Halo Suppression Level

Halo suppression is to suppress the halo of the vehicle headlights. The higher the level is,

the more the halo is suppressed.

Network Traffic Camera Configuration Manual

Содержание iDS-TCE500-B/1550










































































Результаты поиска

Содержание iDS-TCE500-B/1550

Отзывы:

HIKVISION iDS-TCE500-B/1550, Руководство по настройке, Страница: 43 / 73

Результаты поиска

Содержание iDS-TCE500-B/1550

Отзывы: