HIKVISION iDS-TCE500-B/1550 Скачать руководство пользователя страница 64

Страница: 64 / 73

Steps
1. Click Radar.
2. Click Coordinate Calibration.
3. Set the radar calibration.

Set manual calibration. Refer to Manual Calibration for details.

Set auto calibration. Refer to Auto Calibration for details.

Note

The supported calibration modes vary with different models. The actual device prevails.

2.2.1 Manual Calibration

Steps
1. Click Coordinate Calibration.
2. Select Calibration Mode as Manual Calibration.

Figure 2-3 Manual Calibration

3. Draw the lane lines.

1) Select the lane sum.

2) Select the lane line No.

3) Click Draw Lane Line.

The selected lane line will be displayed on the live view picture.

4) Drag the two end points of the line or drag the whole line to adjust its position according to

the actual scene.

5) Repeat the steps above to draw more lane lines.

4. Draw the calibration area.

1) Select Calibration Point.

Network Traffic Camera Configuration Manual

Содержание iDS-TCE500-B/1550










































































Результаты поиска

Содержание iDS-TCE500-B/1550

Отзывы:

HIKVISION iDS-TCE500-B/1550, Руководство по настройке, Страница: 64 / 73

Результаты поиска

Содержание iDS-TCE500-B/1550

Отзывы: