HIKVISION iDS-TCE500-B/1550 Скачать руководство пользователя страница 38

Страница: 38 / 73

Post-record Time

The time after the violation recording ends.

5. Click Save.

1.5.8 Set Supplement Light Linkage

You can link supplement light(s) to the specific lane(s).
Before You Start

Connect the supplement light(s) to the corresponding interface(s) of the device.
Steps

Note

●

Not all the application modes support supplement light linkage.

●

The supplement light linkage parameters vary with different models. The actual device prevails.

1. Go to Configuration → Capture → Application Mode .
2. Select Trigger Mode.
3. Check the corresponding supplement light triggering output interface(s).
4. Select Flashlight Mode.

Simultaneous

The supplement lights of all the lanes will be triggered simultaneously when there is vehicle

passing.

Sequential

Only the supplement light of the specific lane will be triggered when there is vehicle passing.

Note

If LED supplement light is adopted, the recognition rate of the vehicle body color cannot be

guaranteed at night.

5. Click Save.

1.5.9 Set Lane Speed Limit Parameters

Set the speed limit parameters for different types of vehicles.
Steps

Note

●

Not all the application modes support lane speed limit parameters.

●

The lane speed limit parameters vary with different models. The actual device prevails.

1. Go to Configuration → Capture → Application Mode .

Network Traffic Camera Configuration Manual

Содержание iDS-TCE500-B/1550










































































Результаты поиска

Содержание iDS-TCE500-B/1550

Отзывы:

HIKVISION iDS-TCE500-B/1550, Руководство по настройке, Страница: 38 / 73

Результаты поиска

Содержание iDS-TCE500-B/1550

Отзывы: