manualshive.com logo in svg

HIKVISION iDS-TCE500-B/1550, Руководство по настройке, Страница: 39 / 73

Поделиться
Скачать
HIKVISION iDS-TCE500-B/1550 Скачать руководство пользователя страница 39

2. Select Trigger Mode.
3. Set the lane speed limit parameters for small-sized and large-sized vehicles.

Abnormal Low Speed

When the detected speed of the vehicle is lower than the value, the detection is regarded as

abnormal, and a normal speed will be provided randomly.

Min. Speed

The actual allowed min. speed for the vehicles. When the vehicle speed is lower than the

value, low speed capture will be triggered.

Note

The min. speed of large-sized vehicles should be smaller than that of the small-sized vehicles.

Speed Limit Sign

The speed limit on the sign for the vehicles. The value will be overlaid on the captured

pictures.

Speed Limit

The actual speed limit for the vehicles. When the vehicle speed exceeds the value, speeding

capture will be triggered.

Note

The speed limit of large-sized vehicles should be smaller than that of the small-sized vehicles.

Abnormal Speed Threshold

When the detected speed of the vehicle exceeds the value, the detection is regarded as

abnormal, and a normal speed will be provided randomly.

Capture Speed

When the speed of the vehicle on the lane (except the emergency lane) is lower than the set

value, no capture will be triggered.

4. Click Save.

1.5.10 Set Traffic Light Detection Parameters

Traffic light detection is supported for video analysis intersection violation system.
Steps
1. Go to Configuration → Capture → Application Mode .
2. Select Trigger Mode as Video Analysis E-Police.
3. Select Traffic Light Signal Input and set the corresponding parameters.

RS-485

Set Linked Red Light Channel and Yellow Light Related Channel No. according to

the actual wiring.

Network Traffic Camera Configuration Manual

31

Содержание iDS-TCE500-B/1550










































































Отзывы:

Нет отзывов