Network Camera User Manual
UM Network Camera User Manual 071421NA
104
7.
Click
Save
.
Set Face Picture Comparison
Compares captured pictures with face pictures in a library and outputs comparison result. Comparison
result can trigger certain actions when arming schedule and linkage method are set.
Before You Start
You should first create a face picture library and add face pictures. See
Steps
1.
Go to Configuration
→
Comparison and Modeling
→
Face Comparison and Modeling.
2.
Select Face Picture Comparison.
3.
Check Enable Face Picture Comparison.
4.
Select a face picture library as the reference.
5.
Optional: Check
Report Face Comparison Information During Multi-Target-Type Capture Alarm
, if you
want to receive face comparison information during multi-target-type capture alarm.
6.
Select desired face information to upload.
7.
Select a face comparison mode.
•
Best Comparison:
The device captures and compares the target face continuously when the face
target stays in the detection area, and uploads the best scoring face picture and related alarm
information when the target face leaves the area.
•
Quick Comparison:
The device captures and compares the target face when the face grading
exceeds the set
Face Grading Threshold for Capture
.
•
Face Grading Threshold for Capture
: The face grading threshold for the device to judge whether to
capture and upload the face or not.
•
Max. Capture Interval
: The maximum interval between two captures when the target is in the
detection area. The camera takes the capture when it reaches the
Max. Capture Interval
even if the
face grading does not reach the set threshold.
•
Quick Setup Mode
: Select the mode according to actual using scenarios. In custom mode, you can
set
Comparison Timeout
and
Comparison Times
.
8.
Set arming schedule. See
Set Arming Schedule.
9.
Set linkage method. See
Linkage Method Settings.
View Face Comparison Result
Steps
1.
Go to Application.
Содержание IDS-2CD7546G0-IZHSY 8-32 MM
Страница 1: ...Network Camera User Manual...
Страница 112: ......