HIKVISION IDS-2CD7546G0-IZHSY 8-32 MM, Руководство пользователя, Страница: 63 / 112

Network Camera User Manual
UM Network Camera User Manual 071421NA 63
•
Delete the white list that already set.
• Send Test SMS
Send a message to the mobile phone for test.
5. Click Save .
7.9 Wi-Fi
Connect the device to a wireless network by setting Wi-Fi parameters.
This function is supported only by certain device models.
7.9.1 Connect Wi-Fi Manually
Before You Start
Refer to the wireless router or AP user manual to set SSID, key, and other parameters.
Steps
1. Go to the TCP/IP settings page: Configuration → Network → Basic Configuration → TCP/IP.
2. Select Wlan to set the parameters. Refer to
TCP/IP for detailed configuration.
NOTE:
For stable use of Wi-Fi, it is not recommended to use DHCP.
3. Go to the Wi-Fi settings page: Configuration → Network → Advanced Configuration → Wi-Fi.
4. Set and save the parameters.
1) Click
Search
.
2) Select a SSID , which should be the same as that of the wireless router or AP. The network
parameters are automatically shown in
Wi-Fi
.
3) Set the Network Mode to Manage .
4) Input the key to connect the wireless network. The key should be that of the wireless network
connection you set on the router.
What To Do Next
Go to TCP/IP settings page:
Configuration → Network → Basic Configuration → TCP/IP
, and click
Wlan
to
check the IPv4 Address and log in the device. See
Login for detailed information.
7.9.2 Connect Wi-Fi Automatically
The device can connect the Wi-Fi automatically via WPS or QSS protocols, which both support PBC mode
and PIN mode.
Use PBC : Set PBC to connect Wi-Fi automatically. PBC refers Push-Button-Configuration, in which the user
simply has to push a button, either an actual or virtual one (as the
Connect
button on the configuration
interface of the IE browser), on both the Access Point (and a registrar of the network) and the new
wireless client device.