HIKVISION IDS-2CD7546G0-IZHSY 8-32 MM, Руководство пользователя, Страница: 96 / 112

Network Camera User Manual
UM Network Camera User Manual 071421NA 96
window, and right-clicking to finish the area drawing.
3) Click to draw the detection line. The arrow shows entering direction, you can click to
change the direction.
•
If the target crosses the counting area from the entering direction and crosses
the detection line, then it is counted as the entering number.
•
If the target crosses the counting area from the exiting direction and crosses
the detection line, then it is counted as the exiting number.
4) Click and to draw region A and B. Make sure the two areas don’t overlap. You can click
to change the direction.
•
If the target enters from A region to B region, then it is counted as the entering number.
•
If the target enters from B region to A region, then it is counted as the exiting number.
5) Set arming schedule. See
Set Arming Schedule.
6) Set linkage method. See
Linkage Method Settings.
10.4.2 Overlay and Capture
Choose to configure capture parameters and the information you want to display on stream and picture.
• Display VCA info. on Stream : Display smart information on stream, including the target and rules
information.
• Display Target info. on Alarm Picture : Overlay the alarm picture with target information.
•
Target Picture Settings
: Custom, Head Shot, Half-Body Shot, and Full-Body Shot are selectable.
NOTE: If you select Custom , you can customize width , head height , and body height as
required. You can check
Fixed Value
to set the picture height.
• Background Picture Settings : Compared to the target picture, the background picture is the scene
image offering extra environmental information. You can set the background picture quality and
resolution. If the background image needs to be uploaded to the surveillance center, check
Background Upload .
•
People Counting Overlay
: Select flow overlay type. Select the daily reset time. Click
Manual Reset
to
reset it immediately.
•
Camera
: You can set
Device No.
and
Camera Info.
for the camera, which can be overlaid on captured
picture.
•
Text Overlay
: You can check desired items and adjust their order to display on captured pictures by
using . The content of
Device No.
and
Camera Info
should be on the same page.
10.4.3 Face Counting Algorithm Parameters
Sets and optimizes the parameters of the algorithm parameters for Face Counting.