HIKVISION IDS-2CD7546G0-IZHSY 8-32 MM, Руководство пользователя, Страница: 34 / 112

Network Camera User Manual
UM Network Camera User Manual 071421NA 34
Chapter 5 Video Recording and Picture Capture
This chapter introduces capturing video clips and snapshots, playback, and downloading captured files.
5.1 Storage Settings
This section introduces configuring several common storage paths.
5.1.1 Set Memory Card
If you choose to store the files to a memory card, make sure you insert and format the memory card in
advance.
Before You Start
Insert the memory card into the camera. For detailed installation steps, refer to
Quick Start Guide of the
camera.
Steps
1. Go to the storage management setting page: Configuration
→
Storage
→
Storage Management
→
HDD
Management
.
2. Select the memory card, and click Format to start initializing the memory card.
NOTE:
The memory card
Status
turns to
Normal
from
Uninitialized
, which means the memory
card can be used normally.
3. Optional: Define the memory card
Quota
. Input the quota percentage for different contents according
to your need.
4. Click Save .
5.1.2 Detect Memory Card Status
Detects the status of a Hikvision memory card, and receive notifications when your memory card is
detected to be abnormal.
Before You Start
Install a memory card in the device.
Steps
1. Go to the memory card detection setting page: Configuration → Storage → Storage Management →
Memory Card Detection.
2. Click Status Detection to check the Remaining Lifespan and Health Status of your memory card.
• Remaining Lifespan : The percentage of the remaining lifespan. The lifespan of a memory card may
be influenced by factors such as its capacity and the bitrate. Change the memory card if the
remaining lifespan is not enough.