HIKVISION IDS-2CD7546G0-IZHSY 8-32 MM, Руководство пользователя, Страница: 44 / 112

Network Camera User Manual
UM Network Camera User Manual 071421NA 44
Figure 2, Set Rules
• Stop Drawing:
Stop drawing one area.
• Clear All: Clear all the areas.
4. Optional: You can set the parameters of multiple areas by repeating the above steps.
6.1.4 Set Video Tampering Alarm
When the configured area is covered and cannot be monitored normally, the alarm is triggered and the
device takes certain alarm response actions.
Steps
1. Go to Configuration → Event → Basic Event → Video Tampering.
2. Check Enable .
3. Set the
Sensitivity
. The higher the value, the easier to detect the area covering.
4. Click Draw Area and drag the mouse in the live view to draw the area.
•
Stop Drawing: Finish drawing.
• Clear All:
Delete all the drawn areas.