HIKVISION IDS-2CD7546G0-IZHSY 8-32 MM, Руководство пользователя, Страница: 35 / 112

Network Camera User Manual
UM Network Camera User Manual 071421NA 35
•
Health Status : The condition of the memory card. There are three status descriptions, good, bad,
and damaged. You will receive a notification if the health status is anything other than good when
the Arming Schedule and Linkage Method are set.
NOTE:
Change the memory card when the health status is not “good.”
3. Click R/W Lock to set the reading and writing authority to the memory card.
1) Add a Lock. Set the
Lock Switch
to ON.
2) Enter the password.
3) Click Save
5.1.3 Unlock
NOTE:
If you use the memory card on the camera that locks it, unlocking will be done
automatically and no unlocking procedures are required on the part of users.
If you use the memory card (with a lock) on a different camera, go to
HDD
Management interface to unlock the memory card manually. Select the memory card,
click the
Unlock
button next to the
Format
button, then enter the correct password
to unlock it.
1. Remove the Lock. Set the Lock Switch to OFF.
2. Enter the password in
Password Settings
.
3. Click Save .
NOTE:
Only the admin user can set the
R/W Lock
.
The memory card can be only read and write when it is unlocked.
If the camera, which adds a lock to a memory card, is restored to the factory
settings, you can go to the HDD Management interface to unlock the memory card.
4. Set Arming Schedule and Linkage Method . Refer to Set Arming Schedule and Linkage Method Settings
for details.
5. Click Save .
5.1.4 Set FTP
You can configure the FTP server to save images that are captured by events or a timed snapshot task.
Before You Start
Get the FTP server address.
Steps
1. Go to Configuration
→
Network
→
Advanced Settings
→
FTP .