HIKVISION IDS-2CD7546G0-IZHSY 8-32 MM, Руководство пользователя, Страница: 102 / 112

Network Camera User Manual
UM Network Camera User Manual 071421NA 102
NOTE: Only certain device models support the function.
10.7.1 Set Hard Hat Detection
Before You Start
Go to Configuration → System → System Settings → VCA Resources to enable Hard Hat Detection .
Steps
1. Go to Configuration → Hard Hat Detection, and check Enable Hard Hat Detection.
2. Optional: Set Target Generation Speed.
Target Generation Speed
The target generation speed of a face entering the detection region. The greater the value, the quicker
the generation speed.
1. Set detection region.
1) Select detection region.
2) Click
Draw Area
, and click and draw the endpoints of the region in the live view image.
3) Right click to finish the drawing.
• Click Stop Drawing:
Finish drawing the region.
• Click Clear All: Draw the region again.
2. For arming schedule settings, refer to
Set Arming Schedule. For linkage method settings, refer to
Linkage Method Settings.
3. Click Save .
10.8 Face Comparison and Modeling
For certain device models, you need to enable Multi-Target-Type Detection or Face Capture on VCA
Resource page first.
10.8.1 Face Comparison
Face comparison serves the purpose of face recognition by comparing the captured faces with those in
the face picture library.
Set Face Picture Library
Face picture library is used to store modeled human faces and information.
Steps
1. Go to Configuration → Face Picture Library.
2. Create a face picture library.