Digital Video Recorder User Manual
55
HTTP Authentication: If you need to enable the HTTP service, you can set the HTTP
authentication to enhance the access security. Two authentication types are selectable, for
security reasons, it is recommended to select digest as the authentication type.
IP Camera Occupation Detection: The function detects the network camera status. If the
network camera has been added by another video recorder, the network camera status will
show as
in Online Device list.
Step 3
Click Apply.
6.3 Camera Management
6.3.1 Analog Camera
Purpose
You should configure the analog and IP signal input types.
Step 1
Go to Configuration > Camera > Analog.
Step 2
Select signal input type as HD/CVBS or IP.
HD/CVBS: Four types of analog signal inputs including Turbo HD, AHD, HDCVI, and CVBS can be
connected randomly for the channel.
IP: Network camera can be connected for the channel.
Step 3
Click Advanced Settings to set parameters as your desire.
Enhanced IPC Mode: If the option is checked, the maximum number of IP channel will
increase. But it will make smart events unavailable in analog camera.
Enhanced VCA Mode: If the option is checked, the maximum number of IP channel that can
enable line crossing detection and intrusion detection will increase.
4MP Lite Mode: If the option is checked, image of 4 MP or below resolution can be encoded in
full frame rate.
1080P Lite Mode: If the option is checked, signal of1080p resolution is available for the analog
channels.
Step 4
Click Apply. You can view the maximum network camera accessible number in Max. IP
Camera Number.
6.3.2 Network Camera
Activate Network Camera
Purpose
Only activated network cameras can be added.
