HIKVISION DS-PR1-60 Скачать руководство пользователя страница 63

Страница: 63 / 71

DS-PR1-60 User Manual

UM DS-PR1-60 090920NA

Appendix D. FAQ

D.1

How to Achieve an Optimum Detection Range?

Answer:

You can refer to

Radar Mounting Height Recommendation

for radar installation, and you should test the radar

after installation to make sure it is properly mounted. The test method is as follows:

You need to enable OSD function before testing.

The Near Detection Distance:

arrange a tester to move directly from 66 ft (20 m) in front of the radar until

the tester track disappear on the radar detection area. The last tester distance that displayed by OSD, is the

near detection distance.

The Far Detection Distance:

Arrange a tester to move from the directly ahead of the radar and far away from

the radar installation position (outside the radar detection area) to the radar detection area. When the target

track first appears in the detection area, the tester stops moving. The last tester distance that displayed by

OSD, is the far detection distance.

When testing the far detection distance, the tester is required to move along the center

normal of the detection area, to ensure optimum far detection distance.

According to the tested near detection distance and far detection distance, and refer to

Table A-1 Radar

Mounting Height and Detection Range

to adjust the radar mounting angle.

D.2

How To Solve Radar Not Shown in Device List on Radar Page?

Answer:

Delete the radar and add it to the client software again.

The port number of the radar should be 80. When you add the radar to the client software,

set the

Port

as 80.

D.3

How To Adjust Sensitivity to Avoid False Alarms?

•

If there are shrubs in the radar filed, set the radar sensitivity mode to

Shrub Mode

, which helps avoid false

alarms caused by gales, storms, or shrub swings.

•

Shrub Mode

is not satisfactory, set the sensitivity mode to

Expert Mode

(Custom Mode). Set the

Signal

Sensitivity

less than or equal to two, the

Swing Sensitivity

less than five, and the

Tracking Sensitivity

less

than or equal to five.

Содержание DS-PR1-60








































































Результаты поиска

Содержание DS-PR1-60

Отзывы:

HIKVISION DS-PR1-60, Руководство пользователя, Страница: 63 / 71

Результаты поиска

Содержание DS-PR1-60

Отзывы: