HIKVISION DS-PR1-60 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 71

HIKVISION DS-PR1-60 Скачать руководство пользователя страница 22

DS-PR1-60 User Manual

UM DS-PR1-60 090920NA

22

You can zoom in/out to adjust the size of the displayed radar area.

Figure 4-19 Overlap Zones

4.

Right-click to complete drawing, and the system will pop up a window. Enter the zone name, and select

Early Warning Zone

,

Warning Zone

, or

Disabled Zone

as the zone type.

Early Warning Zone

The early warning zone will identify target that has potential risks in advance and trigger alarm, but will not

store alarm track. The early warning zone is green.

Warning Zone

The warning zone will identify the targets entering the area and trigger alarm. The warning zone is orange.

Disabled Zone

The disabled zone will block the target track in the area. The disabled zone is gray.

1.

Click

OK

.

2.

Optional:

Edit or delete the zone.

1)

Double click on the zone, enter the zone editing mode.

2)

Put the cursor on the line of the zone and it will change to a cross, click to add a marker.

«
...
20
21
22
23
24
...
»

Содержание DS-PR1-60








































































Отзывы:

Нет отзывов