HIKVISION DS-PR1-60, Руководство пользователя, Страница: 24 / 71

DS-PR1-60 User Manual
UM DS-PR1-60 090920NA 24
4.2.4 Add Trigger Line
You can draw trigger lines for the radar detection area and set trigger line rule.
Before You Start
• The radar is added to the map.
• Click Finish in the E-map page to exit the editing mode.
• Click on the radar icon and select Disarm to disarm the radar.
1. In E-map page, click Edit to enter the editing mode.
2. Click Radar Settings → Draw Trigger Line . You can draw Trigger Line or Dual-trigger Line.
You can draw trigger line for all radars on the map.
The alarm can be triggered by crossing the Trigger Line according to the alarm rule; the
alarm can be triggered only after crossing double lines of Dual-trigger Line according to the
alarm rule.
Drawing a dual-trigger line that is too tortuous will cause a failure.
3. Draw the trigger line.
1) Click on the radar detection area to draw a trigger line.
2) Select Left -> Right, Left <- Right or Left <-> Right in the pop-up window.
3) Enter the distance between two lines. (Only for Dual-trigger Line.)
Direction determination: Set the starting point as the center of the circle, the trigger line is
clockwise to the right, and counterclockwise to the left.
Up to four trigger lines can be drawn.
Up to one dual-trigger line can be drawn.
Alarm rules: A single arrow -> indicates that the target triggers an alarm when it crosses the
trigger line in the direction of the arrow; a double arrow <-> indicates that the target triggers
an alarm when it crosses the trigger line in any direction.
The trigger lines cannot cross each other.