HIKVISION DS-PHA20-M, Руководство пользователя, Страница: 82 / 127

Operations for All Areas
• Away: When all the people in the detection area leave, turn on the Away mode to arm all zones
in all areas after the defined dwell time.
• Stay: When the people stays inside the detection area, turn on the Stay mode to arm all the
perimeter burglary detection (such as perimeter detector, magnetic contacts, curtain detector in
the balcony) set in all the zones of all areas. At the meantime, the detectors inside the detection
area are bypassed (such as PIR detectors). People can move inside the area and alarm will not be
triggered.
• Disarm: In Disarm mode, all the zones of all areas will not trigger alarm, no matter alarm events
happen or not.
• Clear Alarm: Clear all the alarms triggered by the all the zones of all the areas.
4.3.10 Bypass Zone
When the area is armed, you can bypass a particular zone as you desired.
Before You Start
Link a detector to the zone.
Steps
1. On the device list page, tap the security control panel and then log in to the device (if required)
to enter the Area page.
2. Select a zone in the Zone tab to enter the settings page.
3. Select a zone and enter the Settings page.
Figure 4-49 Zone Settings Page
Hybrid Security Control Panel User Manual
74