HIKVISION DS-PHA20-M, Руководство пользователя, Страница: 70 / 127

Local Log Search
You can search the log on the device.
In the client software, select the device on the Device Management page and click , or enter
the device IP address in the address bar of the web browser and log in. Click Configuration →
System → Log to enter the Local Log Search page.
Figure 4-40 Local Log Search Page
Select a major type and a minor type from the drop-down list, set the log start time and end time
and click Filter. All filtered log information will be displayed in the list.
You can also click Reset to reset all search conditions.
4.2.8 Check Status
After setting the zone, relay, and other parameters, you can view their status.
Click Device Status. You can view the status of zone, relay, sounder, battery, communication, and
repeater.
• Zone: You can view the zone status, alarm status, detector battery capacity, and signal strength.
• Area: You can view area status.
• Sounder: You can view sounder status, battery status, and signal strength.
• Relay: You can view relay status and signal strength.
• Battery: You can view the battery charge.
• Communication: You can view the wired network status, Wi-Fi status, Wi-Fi signal strength,
cellular network status, used data, and cloud connection status.
For more operation in this page, refers to Use the Web Client .
Hybrid Security Control Panel User Manual
62