HIKVISION DS-PHA20-M, Руководство пользователя, Страница: 81 / 127

4.3.9 Arm/Disarm the Zone
Arm or disarm the zone manually as you desired.
Note
Axiom security control panel supports 4 areas.
On the device list page, tap the security control panel and then log in to the device (if required) to
enter the Area page. You can swipe to the left or right to switch areas.
Figure 4-48 Area Page
Operations for a Single Area
• Away: When all the people in the detection area leave, turn on the Away mode to arm all zones
in the area after the defined dwell time.
• Stay: When the people stays inside the detection area, turn on the Stay mode to arm all the
perimeter burglary detection (such as perimeter detector, magnetic contacts, curtain detector in
the balcony). At the meantime, the detectors inside the detection area are bypassed (such as PIR
detectors). People can move inside the area and alarm will not be triggered.
• Disarm: In Disarm mode, all the zones in the area will not trigger alarm, no matter alarm events
happen or not.
• Clear Alarm: Clear all the alarms triggered by the zones of the area.
Hybrid Security Control Panel User Manual
73