HIKVISION DS-PHA20-M Скачать руководство пользователя страница 62

Страница: 62 / 127

Note

• If Enable Arming is enabled, Forced Arming is only effective for Auto Arming.

• If there is a fault in the zone and the forbidden bypass when arming is opened, the arming

will fail.

System Faults

If the option is enabled, the device will upload the system fault report automatically.

One-Push Lock

If the option is enabled, the installer can lock other users.

Audible Tamper Alarm

If the option is enabled, the tamper alarm will link sounders and the control panel. If disabled,

the log will be uploaded when the tamper alarm is triggered, but the sound alarm will not be

triggered.

Authority Advanced Settings

Set advanced authority parameters.
Click Configuration → System → System Options → Advanced Settings to enter the Advanced

Settings page.
You can set the following parameters:
Enable Arming

When you enable the function, during the device arming procedure, the system will check the

configured fault checklist. When there is fault occurred during the arming procedure, the

procedure will be stopped.

Note

PKG keypad and the keyfob do not support this function. If this function is enabled, the arming

will fail if there is a fault. It is necessary to eliminate the fault or close the Enable Arming.

Fault Checklist

The system will check if the device has the faults in the checklist during the arming procedure.

Enable Arming with Fault

Check the faults in the Enable Arming with Fault list, and the device will not stop the arming

procedure when faults occurred.

Arming Indicator Keeps Light

If the device applies EN standard, by default, the function is disabled. In this case, if the device is

armed, the indicator will be solid blue for 5 s. And if the device is disarmed, the indicator will

flash 5 times.

Hybrid Security Control Panel User Manual

Содержание DS-PHA20-M
































































































































Результаты поиска

Содержание DS-PHA20-M

Отзывы:

HIKVISION DS-PHA20-M, Руководство пользователя, Страница: 62 / 127

Результаты поиска

Содержание DS-PHA20-M

Отзывы: