Result
On the initial page and authenticate. If you do not select a status,
the authentication will be marked as the configured attendance
status according to the schedule. If you tap Select Status and
select a status to take attendance, the authentication will be
marked as the selected attendance status.
6.10 Set Access Control Parameters
You can set the access control permissions, including the
functions of authentication mode, NFC anti-cloning, door contact,
anti-passback, lock locked time, door open timeout alarm, etc.
On the Home page, tap ACS (Access Control Settings) to enter the
Access Control Settings page. Edit the access control parameters
on this page and tap to save the settings.
Figure 6-19 Access Control Parameters
The available parameters descriptions are as follows:
Table 6-3 Access Control Parameters Descriptions
Parameter
Description
Terminal Auth.
Mode (Terminal
Authentication
Mode)
Select the face recognition
terminal's authentication mode. You
can also customize the
authentication mode.
Note
• Only the device with the
fingerprint module supports the
fingerprint related function.
• Biometric recognition products
are not 100% applicable to anti-
spoofing environments. If you
require a higher security level,
use multiple authentication
modes.
Reader Auth.
Mode (Card
Reader
Authentication
Mode)
Select the card reader's
authentication mode.
39
