7. Confirm to add the person.
-
Click Add to add the person and close the Add Person
window.
-
Click Add and New to add the person and continue to add
other persons .
7.2.5 Take a Photo via Client
When adding person, you can take a photo of the person by the
webcam of the PC running the client and set this photo as the
person's profile.
Before You Start
Add at least one access control device checking whether the face
in the photo can be recognized by the facial recognition device
managed by the client.
Steps
1. Enter Person module.
2. Select an organization in the organization list to add the person
and click Add.
Note
Enter the person's basic information first. For details about
configuring person's basic information, refer to Configure Basic
3. Click Add Face in the Basic Information panel.
4. Select Take Photo.
5. Connect the face scanner to the PC running the client.
6. Optional: Enable Verify by Device to check whether the facial
recognition device managed in the client can recognize the face
in the photo.
7. Take a photo.
1) Face to the webcam of the PC and make sure your face is in
the middle of the collecting window.
2) Click to capture a face photo.
3) Optional: Click to capture again.
4) Click OK to save the captured photo.
8. Confirm to add the person.
-
Click Add to add the person and close the Add Person
window.
-
Click Add and New to add the person and continue to add
other persons.
7.2.6 Collect Face via Access Control Device
When adding person, you can collect the person's face via access
control device added to the client which supports facial
recognition function.
Steps
1. Enter Person module.
2. Select an organization in the organization list to add the person
and click Add.
56
