Figure 6-10 Transfer Page
2. On the Transfer page, tap Export Att. Data, Export User Data,
Export Face Pic., Export Access Control Param., or Export
Captured Pic.
3. Tap Yes on the pop-up page and the data will be exported from
the device to the USB flash drive.
Note
• The supported USB flash drive format is DB.
• The system supports the USB flash drive with the storage of
1G to 32G. Make sure the free space of the USB flash drive is
more than 512M.
• The exported user data is a BIN file, which cannot be edited.
6.6.2 Import Data
Steps
1. Plug a USB flash drive in the device.
2. On the Transfer page, tap Import User Data, Import Face Pic.,
or Import Access Control Param.
3. Tap Yes on the pop-up window and the data will be imported
from the USB flash drive to the device.
• If you want to transfer all user information from one device
(Device A) to another (Device B), you should export the
information from Device A to the USB flash drive and then
import from the USB flash drive to Device B. In this case, you
should import the user data before importing the profile
photo.
The data of model with T and without T cannot be
transferred with each other.
• The supported USB flash drive format is FAT32.
• Under the normal mode (face recognition mode), the
imported pictures should be saved in the root directory
(enroll_pic) and the picture file's name should be follow the
rule below:
Card No._Name_Department_Employee ID_Gender.jpg
• Under the normal mode (face recognition mode), if the file
enroll_pic cannot save all imported pictures, you can create
29
