manualshive.com logo in svg

HIKVISION DS-K1A340 Series, Руководство пользователя

Поделиться
Скачать
HIKVISION DS-K1A340 Series Скачать руководство пользователя страница 7

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to avoid danger

or property loss.
The precaution measure is divided into Dangers and Cautions:
Dangers: Neglecting any of the warnings may cause serious injury or death.
Cautions: Neglecting any of the cautions may cause injury or equipment damage.

Dangers: Follow these safeguards to prevent

serious injury or death.

Cautions: Follow these precautions to prevent

potential injury or material damage.

 Danger:

●

In the use of the product, you must be in strict compliance with the electrical safety regulations

of the nation and region.

●

Do not connect several devices to one power adapter as adapter overload may cause over-heat

or fire hazard.

●

If smoke, odors or noise rise from the device, turn off the power at once and unplug the power

cable, and then please contact the service center.

●

The socket-outlet shall be installed near the equipment and shall be easily accessible.

●

1. Do not ingest battery. Chemical burn hazard!

2. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it

can cause severe internal burns in just 2 hours and can lead to death.

3. Keep new and used batteries away from children.

4. If the battery compartment does not close securely, stop using the product and keep it away

from children.

5. If you think batteries might have been swallowed or placed inside any part of the body, seek

immediate medical attention.

6. CAUTION: Risk of explosion if the battery is replaced by an incorrect type.

7. Improper replacement of the battery with an incorrect type may defeat a safeguard (for

example, in the case of some lithium battery types).

8. Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery,

which may result in an explosion.

9. Do not leave the battery in an extremely high temperature surrounding environment, which

may result in an explosion or the leakage of flammable liquid or gas.

10. Do not subject the battery to extremely low air pressure, which may result in an explosion or

the leakage of flammable liquid or gas.

11. Dispose of used batteries according to the instructions.

DS-K1A340 Series Face Recognition Terminal User Manual

vi

Содержание DS-K1A340 Series
























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды