User Manual of DS-6600 Audio/Video Encoder
69
Figure 9.2 Edit Schedule
1)
Configure All Day or Segment Record:
If you want to configure the all-day recording, please check the
All Day
checkbox.
If you want to record in different time sections, check the
Segment Record
checkbox. Set the
Start
Time
and
End Time.
Note:
The time of each segment can’t be overlapped. Up to 8 segments can be configured.
2)
Select a
Record Type
. The record type can be Normal, Motion, Alarm, Motion & Alarm, and Motion |
Alarm.
Normal
If you select
Normal
, the video will be recorded automatically according to the time of the schedule.
Record Triggered by Motion Detection
If you select
Motion
, the video will be recorded when the motion is detected.
Besides configuring the recording schedule, you have to set the motion detection area and check the
checkbox of
Alarm Linked Recording
on the
Linking Method
of
Motion Detection
settings interface.
Refer to the
Step 1
in the Section 5.7.1 Configuring Motion Detection.
Record Triggered by Alarm
If you select
Alarm
, the video will be recorded when the alarm is triggered.
Besides configuring the recording schedule, you have to set the
Alarm Type
and check the checkbox of
Alarm Linked Recording
on the
Linking Method
of
Alarm Input Settings
interface.
Record Triggered by Motion & Alarm
If you select
Motion & Alarm
, the video will be recorded when the motion
and
alarm are triggered at
the same time.
Besides configuring the recording schedule, you have to configure the settings on the
Motion Detection
and
Alarm Input Settings
interfaces.
Record Triggered by Motion | Alarm
If you select
Motion | Alarm
, the video will be recorded when the alarm is triggered or the motion is
detected.
Besides configuring the recording schedule, you have to configure the settings on the
Motion Detection
and
Alarm Input Settings
interfaces.
3)
Check the checkbox of
Select All
and click
Cop
y to copy settings of this day to the whole week. You can
