User Manual of DS-6600 Audio/Video Encoder
44
Steps:
1.
Click the
Remote Configuration >
Network Settings > Basic Settings
to enter the Basic Network Settings
interface:
Figure 7.7 Basic Network Settings
2.
Configure the NIC settings, including the NIC Type, IPv4 Address, IPv4 Subnet Mask, IPv4 Default
Gateway, and MTU settings
.
Note
:
The valid value range of MTU is 500 ~ 9676.
3.
If the DHCP server is available, you can click the checkbox of DHCP to automatically obtain an IP address
and other network settings from that server.
4.
If the DNS server settings are required for some applications (e.g., sending email), you should properly
configure the Preferred DNS Server and Alternate DNS Sever here.
Figure 7.8 DNS Server Settings
5.
Click the
Save
button to save the above settings.
7.3.2 Configuring PPPoE Settings
Your device also allows access by Point-to-Point Protocol over Ethernet (PPPoE).
Steps:
1.
Click the
Remote Configuration >
Network Settings > PPPoE Settings
to enter the PPPoE Settings
interface:
