User Manual of DS-6600 Audio/Video Encoder
60
When an alarm is triggered, the video image from the alarming channel configured for “full screen
monitoring” will be displayed in full screen.
Audio Warning
Trigger an audible beep when an alarm is detected.
Notify Surveillance Center
Send an exception or alarm signal to remote alarm host when an event occurs. The alarm host refers to
the PC installed with Remote Client.
Send Email
Send an email with alarm information to a user or users when an event occurs.
Note:
To send the Email when an event occurs, you need to go to the network setting interface to set
the related parameters. Refer to
Section7.3.4 Configuring Email Settings.
(3)
Select the channel you want to trigger an external alarm output when a motion detection event occurs.
Figure 8.14 Motion Detection-Trigger Alarm Output
Note:
To trigger an external alarm output when an event occurs, you need to go to the Alarm Output
Settings interface to set the related parameters.
1)
Click
Remote Configuration> Alarm Settings> Alarm Output
to enter the Alarm Output
Settings interface.
Figure 8.15 Motion Detection-Alarm Output Settings
2)
Select one alarm output channel in the
Alarm Output
drop-down list.
3)
The D
elay
time can be set to
5sec
,
10sec
,
30sec
,
1min
,
2min
,
5min, 10min
or
Manual
.
The
Delay
refers to the time duration that the alarm output remains in effect after alarm occurs.
Note:
If you choose
Manual
, you need to manually disable the alarm output.
4)
Click
Edit
to enter the
Edit Schedule Time
interface. The time schedule configuration is the
