User Manual of DS-6600 Audio/Video Encoder
50
Figure 7.18 Initial Disk
(2)
If the status of the network disk is
Uninitialized
, select the disk from the list by checking the checkbox and
click the
Init
button to start initializing the disk.
(3)
When the initialization is complete, the status of disk will become
Normal.
Figure 7.19 HDD Status-Normal
6.
Set the property of the added network disk.
Select the HDD No., and select the property from the drop-down menu to R/W, Read-only or Redundancy.
Figure 7.20 Set HDD Property
Note
:
1.
Please refer to the User Manual of IP SAN/NAS for the creation of File Path in the network management.
2.
Up to 8 NAS disks or IP SAN disk can be connected to the DS-6600.
7.3.6 Configuring SNMP Settings
Simple Network Management Protocol (SNMP) is an Internet-standard protocol for managing devices on IP
networks.
Steps:
1.
Click
Remote Configuration >
Network Settings >SNMP Settings
to enter the SNMP Settings interface.
2.
Select the NIC port (default: 161).
3.
When the SNMPv1 or SNMP v2c is enabled (or both enabled), you can configure the read SNMP
community (default: public), write SNMP community (default: private), tap address (default: empty) and trap
port (default: 162).
