User Manual of 4-inch High Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
22
You can define the speed of the dome movements.
(1)
DOME SPEED:
the manual movement speed can be set as
HIGH
,
MID
or
LOW
.
(2)
SCAN SPEED:
scan speed defines the scan degree per second of panning scan, tilting scan, frame
scan, random scan and panoramic scan. Scan speed is adjustable from 1 to 40 degrees per
second.
(3)
PRESET SPEED:
the speed of calling a preset can be set from level 1 to 8. The higher level
corresponds to the faster speed to call a preset.
Limit stops
Purpose:
The dome can be programmed to move within the configurable limit stops (left/right, up/down).
Steps:
1.
Move the cursor to
LIMIT STOPS
and click
IRIS+
to set it
ON
to enable this feature. Click
IRIS+
again to confirm.
2.
Move the cursor to
<SETTING STOPS>
and click
IRIS+
. You will see the message
SET LEFT LIMIT
on the screen.
3.
Click the direction buttons in the PTZ panel to configure the left limit stop. Click
IRIS+
to confirm.
4.
Follow the prompts to configure the right, up and down limit stops on the menu.
Note:
The new limit stops will overwrite the existed ones by default.
5.
You can clear the defined limit stops. Click
IRIS+
to enter
CLEAR STOPS
and click
IRIS+
again to
clear the stops.
3.4.2
Configuring Presets
Purpose:
A preset is a predefined image position. For the defined preset,
you can simply click the calling
button to view the desired image position.
TASK 1:
Set a preset.
Steps:
1.
Move the cursor to enter preset configuration submenu:
MAIN MENUS > DOME SETTINGS > PRESETS
PRESETS
PRESET NUM 1
[UNDEFINED]
<EDIT LABEL>
PRESET PTZ
CLEAR PRESET
BACK EXIT