User Manual of 4-inch High Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
13
3.3
Configuring Image Parameters
3.3.1
Configuring Camera Parameters
Purpose:
You can set the camera parameters including focus, shutter speed, iris, etc.
Enter the camera parameters settings menu:
MAIN MENUS > DOME SETTINGS > CAMERA PARAMETER
CAMERA
FOCUS AF
ZOOM LIMIT 36
ZOOM SPEED HIGH
SLOW SHUTTER ON
IRCUT FILTER AUTO
D/N LEVEL HIGH
SHARPNESS 9
BACK EXIT
CAMERA
BLC/WDR OFF
BLC LEVEL N/A
AE MODE AUTO
IRIS 10
SHUTTER 60
GAIN 1
EXPOSURE COMP 7
BACK EXIT
CAMERA
WHITE BALANCE AUTO
RED 210
BLUE 150
IMAGE FLIP OFF
FOCUS LIMIT 1M
INIT LENS OFF
NOISE REDUCE LOW
BACK EXIT
Figure 3-5
Camera Settings
Task 1:
Configure the focus settings.
Setting the focus mode
Steps:
(1)
Move the cursor to
FOCUS
using the direction buttons and click
IRIS+
to change the cursor to
totally hollow.
(2)
Click up/down direction buttons to choose the focus mode as
AF
,
MF
or
HAF
.
AF
(Auto-focus): The lens remains in focus during PTZ movements.
MF
(Manual Focus): You need to adjust the focus with
Focus+
and
Focus-
buttons manually.
HAF
(Half-auto Focus): The speed dome focuses automatically only once after panning,
tilting and zooming.
(3)
Click
IRIS+
button to save the settings.
Setting the focus limit
Purpose:
This function is used to limit the minimum focus distance. You can configure the focus limit
longer when the target is at a distance, to avoid the speed dome focusing on the objects close to
it; or configure the focus limit shorter when the target is near the speed dome, and avoid it
focusing on the objects father.
You can set
FOCUS LIMT
as
1CM
,
30CM
,
1M
,
3M
or
AUTO
.
Note:
The focus limit value varies depending on the models of speed dome.
Task 2:
Configure the iris, gain and shutter speed.
Setting the AE mode
Purpose: