English
55
NOTE
Do not give a strong shock to the switch panel or break it. It may lead to a trouble.
10. About the mode change function
The unit has “Transmission mode” and “Auto mode”.
The mode can be switched by pressing the Auto mode
switch. (
Fig. 12
)
○
With Auto mode, you can lower noise and vibration by
lowering the maximum number of revolutions while in
a no-load state.
While in Auto mode, the number of revolutions will be raised
if the load becomes greater during operation.
On the other hand, the number of revolutions will be lowered
if the load decreases during operation.
NOTE
Do not give a strong shock to the switch panel or break it. It
may lead to a trouble.
GRINDER OPERATION
CAUTION
To extend the lifetime, the lithium-ion battery equips with the protection function to
stop the output. Therefore, if the tool is overloaded, the motor may stop. However,
this is not the trouble but the result of protection function. In this case, release the
switch of tool and eliminate the causes of overloading.
NOTE
○
To prevent injuries, this product has a function that prevents unexpected motor rotation
when the battery is inserted. The motor will not run if the battery is inserted while the switch
is still ON. After installing the battery, turn the switch o
ff
and then back on again.
○
These models are equipped with a protection function that will shut down the tool in the
event of an overload.
Should the tool shut down due to an overload, turn the power o
ff
and then turn it back on
again.
An overload that stops tool operation and lasts
more than 10 seconds may not be released
by turning the power o
ff
and on. Should this
happen, remove the battery from the tool and
reinstall it before turning on the power switch.
1. Hold the grinder
fi
rmly by its housing and side
handle (
Fig. 13
).
The grinder produces a counterforce which
must be controlled by
fi
rmly holding onto the
grinder.
Fig. 12
Auto mode switch
Switch panel
Side handle
Fig. 13
00Book̲G1810DE̲ChS.indb 55
00Book̲G1810DE̲ChS.indb 55
2022/08/26 16:37:28
2022/08/26 16:37:28
Содержание G 1813DE
Страница 65: ...65 00Book G1810DE ChS indb 65 00Book G1810DE ChS indb 65 2022 08 26 16 37 30 2022 08 26 16 37 30...
Страница 66: ...66 00Book G1810DE ChS indb 66 00Book G1810DE ChS indb 66 2022 08 26 16 37 30 2022 08 26 16 37 30...
Страница 67: ...67 00Book G1810DE ChS indb 67 00Book G1810DE ChS indb 67 2022 08 26 16 37 30 2022 08 26 16 37 30...