English
35
b) Use power tools only with speci
fi
cally designated battery packs.
Use of any other battery packs may create a risk of injury and
fi
re.
c) When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a
fi
re.
d) Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs,
fl
ush with water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
6) Service
a) Have your power tool serviced by a quali
fi
ed repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
CAUTION
Keep children and in
fi
rm persons away.
When not in use, tools should be stored out of reach of children and in
fi
rm persons.
SAFETY WARNINGS COMMON FOR GRINDING OR
ABRASIVE CUTTING-OFF OPERATIONS
a) This power tool is intended to function as a grinder or cut-o
ff
tool. Read all safety
warnings, instructions, illustrations and speci
fi
cations provided with this power tool.
Failure to follow all instructions listed below may result in electric shock,
fi
re and/or serious
injury.
b) Operations such as sanding, wire brushing or polishing are not recommended to
be performed with this power tool.
Operations for which the power tool was not designed may create a hazard and cause
personal injury.
c) Do not use accessories which are not speci
fi
cally designed and recommended by
the tool manufacturer.
Just because the accessory can be attached to your power tool, it does not assure safe
operation.
d) The rated speed of the accessory must be at least equal to the maximum speed
marked on the power tool.
Accessories running faster than their rated speed can break and
fl
y apart.
e) The outside diameter and the thickness of your accessory must be within the
capacity rating of your power tool.
Incorrectly sized accessories cannot be adequately guarded or controlled.
f) Threaded mounting of accessories must match the grinder spindle thread. For
accessories mounted by
fl
anges, the arbour hole of the accessory must
fi
t the
locating diameter of the
fl
ange.
Accessories that do not match the mounting hardware of the power tool will run out of
balance, vibrate excessively and may cause loss of control.
00Book̲G1810DE̲ChS.indb 35
00Book̲G1810DE̲ChS.indb 35
2022/08/26 16:37:25
2022/08/26 16:37:25
Содержание G 1813DE
Страница 65: ...65 00Book G1810DE ChS indb 65 00Book G1810DE ChS indb 65 2022 08 26 16 37 30 2022 08 26 16 37 30...
Страница 66: ...66 00Book G1810DE ChS indb 66 00Book G1810DE ChS indb 66 2022 08 26 16 37 30 2022 08 26 16 37 30...
Страница 67: ...67 00Book G1810DE ChS indb 67 00Book G1810DE ChS indb 67 2022 08 26 16 37 30 2022 08 26 16 37 30...
