English
52
[How to attach and adjust the wheel guard]
[G1810DE, G1810DF] (
Fig. 7
)
○
Set the wheel ass’y to the packing gland.
○
Tighten M5 hex. socket bolt to secure the wheel
guard while the lever is in closed position.
○
Perform the adjustment of the wheel guard while the
lever is released. (Loosen M5 hex. socket bolt and
readjust if the wheel guard does not rotate smoothly.)
○
After adjustment, if grinder operation is required,
perform the operation only after setting the lever in
closed position.
○
Lubricate the sliding section of the set piece (B) and
the lever if the lever does not move smoothly.
[G1813DE, G1813DF] (
Fig. 8
)
○
Open and hold the lever, then install the wheel guard
so that the projection on the wheel guard aligns with
the recess in the packing gland.
○
Rotate the wheel guard to an angle suitable for use,
then release your
fi
nger from the lever.
○
Rotate the wheel guard left or right until it locks into
place.
WARNING
If the wheel guard is not attached properly, a
broken wheel may result in and cause death or
serious injury.
4. Thoroughly check that the depressed center wheel is free of cracks, splits and other
abnomalities before mounting. Make sure it is
fi
rmly clamped and has been properly
mounted. Refer to page 57 of this manual for ASSEMBLING AND DISASSEMBLING THE
DEPRESSED CENTER WHEEL.
5. Test the grinder before using.
Before actually beginning the grinding work, test the grinder by
fi
rst clearing the area of
all other personnel. Make sure the wheel guard is in place and that you are wearing eye
protection. Turn the grinder “on”, and make sure the grinder runs smoothly and shows no
abnormalities.
Duration of the trial run is as follows:
When depressed center wheel is replaced .............................................3 minutes or more
When starting daily work ........................................................................1 minute or more
Lever
Set piece (B)
M5 hex.
socket bolt
Fig. 7
Lever
Wheel guard
Packing gland
Fig. 8
00Book̲G1810DE̲ChS.indb 52
00Book̲G1810DE̲ChS.indb 52
2022/08/26 16:37:27
2022/08/26 16:37:27
Содержание G 1813DE
Страница 65: ...65 00Book G1810DE ChS indb 65 00Book G1810DE ChS indb 65 2022 08 26 16 37 30 2022 08 26 16 37 30...
Страница 66: ...66 00Book G1810DE ChS indb 66 00Book G1810DE ChS indb 66 2022 08 26 16 37 30 2022 08 26 16 37 30...
Страница 67: ...67 00Book G1810DE ChS indb 67 00Book G1810DE ChS indb 67 2022 08 26 16 37 30 2022 08 26 16 37 30...