HighLine Bale Pro CFR651, Руководство оператора

Страница: 29 / 77

Section 3 - Preparing the CFR 651
10. Adjust the height of the hitch tongue.
Note: Do this procedure on level ground.
- Level the frame of the CFR 651 to
ensure the bale forks can be lowered
to load a bale.
- Adjust the hitch tongue height to
connect with the tractor drawbar while
keeping the frame level .
- Fasten the tongue in place and torque
the bolts to 210 ft-lbs (285 Nm).
11. Set the level of the lower discharge
door.
(No Feed Chopper Present)
- The lower discharge door adjustment
handle (1) is located on the rear tub
wall.
- There are 3 door positions:
- The lowest position is often used
for wet material or for a shorter
throw distance.
- The middle position is often used
for average material or medium
throw distance.
- The highest position is often used
for dry material, longer throw and
also for bunk feeding.
- Snap the handle into a slot (2).
Note: When a Feed Chopper is present,
there are other settings that must
be adjusted. Refer to the Feed
Chopper Operator’s Manual for
these adjustments.
Adjust Height of Hitch Tongue
213174
Lower Discharge Door
213182C
Page 3-4