High End Systems Studio Command 1200, Руководство пользователя

Страница: 63 / 108

CHAPTER 4
Fixture Programming
Studio Command Series User Manual 53
Control Parameter
The Control parameter activates certain Fixture, Shutter, and Lamp functions on other Channels.
To access all control settings in Standard Protocol (except for Pan & Tilt MSpeed Off), first select
a control channel value, then set the Shutter channel to “0.”
Studio Command 1200/700
Control Setting
Description
Notes
Safe
Disables all Control settings for normal operation.
The Control channel should not be crossfaded.
Pan & Tilt
MSpeed Off
Sets Pan & Tilt MSpeed to off. The Control channel
should not be crossfaded. Command is sent
instantaneously
Display Off Sets display to off. Commands must be sent
for 20 consecutive DMX
packets (1.25 seconds).
Display Dim Dims display characters.
Display Bright Brightens the display characters.
Home Remotely homes the fixture.
Lamp On Remotely restrikes the fixture’s lamp.
Lamp Off Remotely extinguishes the fixture’s lamp.
Shutdown
Remotely deactivates the fixture. When a fixture is
shut down, the lamp is extinguished, power to the
motors is disabled, and the LED display reads “SHUT
DOWN”. If a fixture is in shutdown mode, you must
home the fixture to bring it back into operation. Commands must be sent
for 5 seconds.
Lamp Assisted
Strobes Periodic and Random strobe functions are lamp
assisted. Ramp functions are not lamp assisted. The shutter does not have
to be set to 0 for Lamp
functions
Lamp functions Modifies the shutter channel
Lamp/mechanical
dimming
Lamp output will vary from a minimum to 1200/700
Watts as the mechanical dimming ranges from 0–
100%
Lamp only dimming
Electronic dimming only from a minimum to 1200/700
Watts.
Studio Command H
Control Setting Description Notes
Safe
Disables all Control settings for normal operation. The
Control channel should not be crossfaded.
Pan & Tilt
MSpeed Off
Sets Pan & Tilt MSpeed to off. The Control channel
should not be crossfaded. Command is sent
instantaneously
Display Off Sets display to off.
Commands must be sent for
1.25 seconds.
Display Dim Dims display characters.
Display Bright Brightens the display characters.
Home Remotely homes the fixture.
Shutdown
Remotely deactivates the fixture. When a fixture is shut
down, the lamp is extinguished, power to the motors is
disabled, and the LED display reads “SHUT DOWN”. If
a fixture is in shutdown mode, you must home the
fixture to bring it back into operation.
Commands must be sent for
5 seconds.