High End Systems studio color, Руководство пользователя

Страница: 36 / 114

1-10 Studio Color User’s Manual
Truss Mounting
To mount the fixture on a truss, you will need the following equipment:
• (2) Safety cables
• (2) Cheeseborough clamps (recommended) or other mounting hardware
Complete the following procedure to mount the fixture to a truss:
1. Lay the fixture on its side and attach the mounting hardware to the
center holes on the base. Refer to Figure 1.8
Figure 1.8. Attaching Mounting Hardware
2. Install the fixture on the truss and secure the mounting hardware.
3. Loop the safety cables through an outer hole on the base of the unit,
around the handle, and out the other outer hole. Refer to Figure 1.9.
Figure 1.9. Safety Cable Installation
Caution: Do not place safety cables through the lower plate that connects to the
fixture yoke. Doing so may cause interference with the fixture’s pan
movement.
center holes