High End Systems studio color, Руководство пользователя

Страница: 38 / 114

1-12 Studio Color User’s Manual
DMX Starting Channel
Use the following subsections to set the fixture DMX starting channel. Starting
channels may be set by fixture number (1-32) or DMX channel number (1-512). Either
way, each fixture uses 16 DMX channels.
Setting the Starting Channel by Fixture Number
To set the starting channel by fixture number, complete the following procedure:
1. Apply power to the fixture.
Note: to skip the homing process, simultaneously hold down the <
MENU
> and
<
ENTER
> buttons immediately after applying power to the fixture.
2. Observe the display on the front of the fixture. Initially, it will display the
software version (
V
xxx) and then the fixture number (
F 0 1
).
3. Press and hold the <
MENU
> button until the display changes to the
A d d R
field. Press the <
ENTER
> button to manipulate the address field. Refer to
Figure 1.12.
Figure 1.12. Using the Front Panel
4. Using the up and down arrow keys on the front of the unit, set the desired
fixture number (
F 0 1
to
F 3 2
). The display will flash when it is moved
from the stored value.
5. Press the <
ENTER
> key to store the appropriate fixture number. The
display will stop flashing.
Note: if the <
ENTER
> key is not pressed, the unit will not store the starting
channel.
6. Press the <
MENU
> button to exit the menu.