High End Systems studio color, Руководство пользователя

Страница: 66 / 114

3-16 Studio Color User’s Manual
Setting Fixture Shutdown Time
Studio Color can automatically shut itself down when controller is turned off or
the link is unplugged (no DMX data is present). To set the shutdown time,
complete the following procedure:
1. Hold the <
MENU
> button until the display changes to
A d d R
.
2. Using the up and down buttons, scroll down to the
S E T
field and press the
<
ENTER
> button.
3. Using the up and down buttons, scroll down to the
S / d N
field and press
the <
ENTER
> button.
4. Using the up and down buttons, set the shutdown time in minutes at 5
(
5 M N
) or 10 minutes (
1 0 M N
) and press the <
ENTER
> button.
Setting the Lamp Power
For special applications, the lamp in the Studio Color 575-S can be set to 250
watts. This feature decreases light output, decreases heat, and saves power.
Notes: do not mix fixtures that have different lamp power settings. The light output
is different.
Warning: Never install a 250 watt lamp into a Studio Color fixture. The lamp may
explode and will malfunction.
To set the lamp power, complete the following procedure:
1. Hold the <
MENU
> button until the display changes to
A d d R
.
2. Using the up and down buttons, scroll down to the
S E T
field and press the
<
ENTER
> button.
3. Using the up and down buttons, scroll down to the
L A M P
field and press
the <
ENTER
> button.
4. Using the up and down buttons, set the lamp power to either
5 7 5 W
or
2 5 0 W
and press the <
ENTER
> button. After a time delay, the fixture will
adjust the lamp to appropriate new power level.
Notes: if you are using the 250 watt setting, the lamp will initially power up to 575
watts (warm up) for the first ten minutes of operation and then change to
250 watts. If you revert to the factory default settings, the lamp power
setting will remain unaffected.