30
NGS Mach II User Guide v1.1
Generic OBDII Functions
Pid Data Monitor
Allows you to monitor PCM-
OBDII supported PIDs
Freeze Frame PID Data
Displays the trouble code
and its node address in
the left window. The right
window displays—or
freezes—PID values
corresponding to the time
that the code was set
Oxygen Sensor Test Results
Displays test results over two
screens
Diagnostic Monitoring Test
Results
Displays test results
Request Vehicle Info
Displays the vehicle’s VIN, CAL
and CVN
Diagnostic Trouble Codes
Displays trouble codes and
their module node addresses
Clear Diagnostic Codes
Clears codes in the PCM
Pending Trouble Codes
Displays pending trouble
codes
On Board Device Control
Allows you to control output
devices within the system
On Board System Readiness
Displays the status of all
OBD II tests required for the
selected vehicle
Note: The functions available vary depending on the vehicle and module selected.
Basic Procedure
1. Select the Vehicle, Module, and Action
(
Generic OBDII Functions
)
from the Main
Menu.
1 )MODEL : 2003 CROWN VICTORIA
4.6L
2)MODULE: PCM - POWERTRAIN CONTROL MOD
3)ACTION : GENERIC OBDII FUNCTIONS
4)GO ->
SELECT ITEM AND PRESS TRIGGER TO START
2. Highlight
GO
and then press
TRIGGER
.
1 )MODEL : 2003 CROWN VICTORIA
4.6L
2)MODULE: PCM - POWERTRAIN CONTROL MOD
3)ACTION : GENERIC OBDII FUNCTIONS
4)GO ->
SELECT ITEM AND PRESS TRIGGER TO START
This test is only available for non-CAN vehicles
NGS Mach II can link with any non-CAN vehicle that is OBDII compliant, offering several options for
diagnosing OBDII related problems. Hook up NGS Mach II to the vehicle with the
OBDII Adapter Cable
connecting to the vehicle’s Generic Scan Tool Connector. For running the tests, consult the appropriate
Power Train Control/ Emissions Diagnosis and Service Manual Car/Truck On Board Diagnostic II Manual.
Some of the available options are:
