Hickok NGS Mach II, Руководство пользователя

Страница: 10 / 53

NGS Mach II User Guide v1.1
10
Getting Started
Selecting a Vehicle, Module and Action
Before you can begin testing, you will need to select the test vehicle, the available modules for the
vehicle and the type of test you wish to run.
2. Highlight
SELECT NEW VEHICLE YEAR &
MODEL
, and then press
TRIGGER
.
NO VEHICLE SELECTED
SELECT NEW VEHICLE YEAR & MODEL
DESELECT CURRENT MODEL
SELECT ITEM AND PRESS TRIGGER TO START
d
3. Highlight the model year and VIN for the
vehicle you are testing and then press
TRIGGER .
2008 - VIN #10 : 8
2007 - VIN #10 : 7
2006 - VIN #10 : 6
2005 - VIN #10 : 5
2004 - VIN #10 : 4
2003 - VIN #10 : 3
2002 - VIN #10 : 2 THRU 1999 VIN #1
1 9 9 8 - VIN #10 : W THRU 1994 VIN #1
SELECT ITEM AND PRESS TRIGGER TO START
3. Highlight the vehicle you wish to select
and then press TRIGGER .
2008 CROWN VICTORIA 4.6L
2008 ECONLOLINE 6.0L DIESEL
2008 ECONLOLINE 4.6L
2008 ECONLOLINE 5.4L
2008 EDGE 3.5L
2008 ESCAPE 2.3L
2008 ESCAPE 3.0L
2008 ESCAPE HYBRID 3.0L
2008 EXPEDITION 5.4L
2008 EXPEDITION EL 5.4L
SELECT ITEM AND PRESS TRIGGER TO START
d
Selecting a Vehicle
Accurate selection is important. If you select a
vehicle and engine that doesn’t match the vehicle
you’re testing, your results may be incorrect.
Before you begin, you’ll need the following
information about the test vehicle:
For All Vehicles:
• Model year • Engine size
For Some Vehicles:
• Transmission type
• State where manufactured—California’s
standards differ from the other 49 states
• Under or over GVW weight criteria
—
indicated
by a + or – in the column after engine size
For flexibility, NGS Mach II allows you to
choose a vehicle that is different from the
one you’re testing. This is useful if you want to
look up a code in the Diagnostic Trouble Code
Library for a vehicle other than the one you’re
testing. However, remember to reselect the
correct vehicle before you resume testing.
Procedure
To choose a vehicle, follow these steps:
1. Highlight MODEL and then press TRIGGER .
1 )MODEL : _ _ _ _
2)MODULE: _ _ _ _
3)ACTION : _ _ _ _
4)GO ->
SELECT ITEM AND PRESS TRIGGER TO START
d