Hickok NGS Mach II, Руководство пользователя

Страница: 14 / 53

NGS Mach II User Guide v1.1
Service Bay Functions
14
Adjusting Fields
Some functions require you to enter information
about your vehicle. These screens display with
blank fields or fields with default information in
them. Manipulate the fields this way:
1. Turn the dial to highlight the field you
want to set.
2. Press TRIGGER to select the field.
3. Turn dial to scroll through characters or
options.
4. Press
TRIGGER
to accept.
Recording Data
Some functions have recording capability. You
can record and store up to four samples.
1. Follow the instructions on the screen to
begin the test.
2. Press
REC
to record the test.
3. Press STOP to exit the recording function.
NGS Mach II prompts you to select a
storage area (1–4).
4. Press the corresponding number. NGS
Mach II stores the information for 48 hours.
Viewing Data
Screens that have a recording function also
have a viewing function. The view option is
available only when the link is established.
1. Press
VIEW
to display the samples you
recorded.
2. NGS Mach II prompts you to select the
recording area you wish to view.
3. Select an area by pressing the
corresponding number.
4. Press CANCEL to return to the function
screen.
Procedure
1. Select the Vehicle, Module, and Action from
the Main Menu. Note: 2002 and older non-CAN
vehicles will default to ALL MODULES SELECTED.
1 )MODEL : 2008 CROWN VICTORIA 4.6L
2)MODULE: PCM - POWERTRAIN CONTROL MOD
3)ACTION : POWER BALANCE 4)GO ->
SELECT ITEM AND PRESS TRIGGER TO START
2. Highlight GO and then press TRIGGER .
1 )MODEL : 2008 CROWN VICTORIA 4.6L
2)MODULE: PCM - POWERTRAIN CONTROL MOD
3)ACTION : POWER BALANCE
4)GO ->
SELECT ITEM AND PRESS TRIGGER TO START
Note: For non-CAN vehicles, you will be
prompted to reselect the following (press
TRIGGER after each selection):
• SELECT NEW VEHICLE YEAR & MODEL
• Select model year
• SELECT VEHICLE AND ENGINE
• Confirm selection
3. Select SERVICE BAY FUNCTIONS .
SERVICE BAY FUNCTIONS
* RETURN TO MAIN MENU *
SELECT ITEM AND PRESS TRIGGER TO START
d
4. Press TRIGGER . Follow the instructions on
the screen to run the test.