NGS Mach II User Guide v1.1
Diagnostic Functions
22
Use the dial to enter analog values. NGS XLC
sends several commands as long as the dial
is moving.
SEND
This button appears
only in
manual mode
—select mode in
SETUP. Sends the signal.
PIDS
Displays in the right window the
PIDs for the module selected in the
left window.
SIG
Toggles
SIGNAL OUT
on (signal
simulation) or off (multimeter function).
Toggles between the windows.
This button only appears while PIDs
display.
*
An asterisk marks each selected
PID.
DEFN
Press in any PID screen
to display definitions of
highlighted PIDS. Press CANCEL
to exit the DEFN screen.
Module Identification
1. Select
Module Identification
from a
module’s options list.
2. The screen displays the identification
number of the module selected.
Function Tests
1. Select
FUNCTION TESTS
from a module’s
options list.
2. Select an option and follow the screen
instructions to run the test.
3. The options available depend on the
module for which you’re running the
Function Tests.
4. The screen displays the results after tests
are finished.
