HGST ULTRASTAR SERV24, Руководство пользователя

Страница: 46 / 231

5. Unlatch the connectors that attach the CMA to the enclosure and the rail by locating the latch release
button and pressing it from either side of the latch. There are three total connections that need to be
removed, one at the elbow and two at the opposite end.
Figure 34: Unlatching a CMA Connector
6. Install the CMA.
a) The CMA has one arm that is connected to the rails and the enclosure chassis by four connectors.
The first step in installing the arm for the CMA is to first determine what orientation the arm needs to
be in. The arm should have the elbow on the left side.
b) Orient the CMA so that the elbow is on the left-hand side.
c) Insert the connectors into the rail connections on either side as seen in the image below.
Figure 35: CMA Installation
46
3 Part Replacement
User Guide 3.3 CMA Replacement