HGST ULTRASTAR SERV24, Руководство пользователя

Страница: 194 / 231

2. Display the list of active users on the enclosure by issuing the command ipmitool –l lan –H <IP ADDRESS>
–U admin –P admin user list.
Note: The default log-in credentials are username: admin and password: admin. These may be
different if the user changes the administrator credentials.
Figure 284: User List
The Terminal will provide a list of active users.
3. Locate the last ID number in the list of active users. The new user being created will be one ID number
higher than the list of active users. For example, if the last active user is ID number 3, the new user will
be ID number 4.
4. Create a new user by issuing the command ipmitool –l lan –H <IP ADDRESS> –U admin –P admin user
set name <ID NUMBER> <USERNAME>.
The new user will be created.
Figure 285: New User
5. Verify the new user has been created by issuing the command ipmitool –l lan –H <IP ADDRESS> –U
admin –P admin user list.
The Terminal will provide a list of active users with the new user at the end of the list.
6. Set a password for the new user by issuing the command ipmitool –l lan –H <IP ADDRESS> –U admin
–P admin user set password <ID NUMBER> <PASSWORD>
The new user password will be set.
Figure 286: New User Password
7. Provide access privileges for the new user by issuing the command ipmitool –l lan –H <IP ADDRESS>
–U admin –P admin user priv <ID NUMBER> <PRIV LIMIT>.
Note: Privilege limits: 1 = Callback, 2 = User, 3 = Operator, and 4 =
Administrator
Figure 287: New User Privileges
194
4 System Management
User Guide 4.4 IPMI Overview