Hexagon TP-R-400, Руководство по эксплуатации

Страница: 21 / 30

TP-R-400 Operation
21
2.2.2 Mounting/dismounting the tool holder
2.2.2.1 Mounting tool holders Ø20
1. Dismounting the tool holder:
1.1 Remove all "A" and "C" screws (refer to Fig. 8).
1.2 Remove tool holder
2. Mounting the tool holder:
2.1 Carefully slide the tool holder onto the probe body, adjusting thread "C" to the cone holes on the probe.
2.2 Insert both clamping screws "C" and tighten lightly.
2.3 Insert all adjustment screws "A" and tighten lightly.
3. Align the stylus to spindle center (refer to chapter 2.2.5).
4. Calibrate the probe.
Mounting/dismounting the tool holder
C = Clamping screw M5x0.5x7 (AF2.5 mm) (2x)
(1351)
Hexagon key
AF2 mm (1097)
AF2.5 mm (1346)
A = Adjustment screw M4x8 (AF2 mm) (4x)
(1352)
Adjustment screw "A"
in thread
Touch probe
Clamping screw "C"
in cone hole
Tool holder