Hexagon TP-R-400, Руководство по эксплуатации

Страница: 19 / 30

TP-R-400 Operation
19
2.2 Commissioning and Setup of the Touch Probe
2.2.1 Installing/Changing the Stylus
2.2.1.1 Installing/Changing the Stylus (Measuring Unit MY21.00)
NOTICE
Risk of damage to the equipment!
•
Do not apply any turning force to the measuring unit!
•
During replacement, always hold the stylus connection with the spanner AF4 mm!
1. Unscrew the stylus from the touch probe using the mounting pin.
1. Carefully screw the new stylus with mounting pin into the touch probe (Fig. 6).
2. Align the stylus to spindle center (refer to chapter 2.2.5).
3. Calibrate the touch probe.
Stylus change with measuring unit MY21.00
Mounting pin
(0885)
Stylus
M=0.6 Nm (0.44 lbf.ft)
Spanner
AF4 mm
(1665)