HEUTE ProfilGate b55, Руководство по эксплуатации

Страница: 30 / 32

54
Bristles get torn out
Wheels were turned or stronlgy accelerated or
braked on the cleaning field.
Avoid turning and strong acceleration/braking
on the cleaning field as much as possible.
Replace any damaged brush strips
or
Pallets were pulled or slid on the cleaning field
Lift up fork lift and pallet when crossing
Brush strips no longer lower
Too much dirt has collected under the brush strips
or an object has gotten stuck in the side, for
example, a screw
Lift grate and clean tray/remove
Stuck objects
Brush strips are hanging or no longer
lower
Brush strips have serious wear and must be
replaced (all models) or an object has gotten
stuck in the side, for example, a screw.
Dust is stirred up when driving over the cleaning
field.
Tray is filled with too much dirt.
Lift grate and clean tray, shorten cleaning interval
Bristles are bent
The bristles are strongly worn (see example image)
Replace brush strips
Grates move when passing in trays
Too much dirt under the grates
Lift grate and clean tray,
Reduce speed
Liquid runs over the edge of the tray
(only ProfilGate® aqua)
Drain clogged or fill level too high
Clean drain or drain/extract excess liquid
Readjust overflow plugs (height-adjustable)
Liquid sprays out while passing
(only ProfilGate® aqua)
Passing speed too high
Drive slower
or
Fill level too high
Drain/extract excess liquid
Readjust overflow plugs (height-adjustable)
Wheels are not as wet as desired
(only ProfilGate® aqua)
Fill level in tray too low
Refill cleaning liquid
or
Check correct position of overflow
Readjust overflow plugs (height-adjustable)
Fleece comes loose from grate/tray
(only ProfilGate® dryzone)
Clamping roller has come undone
Realign fleece and fix with clamping roller
Fleece has torn (only ProfilGate® dryzone)
Wear through frequent passing
or
Damage through sharp objects
Replace fleece
Trouble shooting
by qualified personnel
www.nsltechnology.com